SensiGFOX 1.0 and SensiLoRa 1.0
Sensor Data
over
Low-Power Wide-Area Networks (LPWANs)
Freedom from hardware development and production logistics
SensiGFOX | LoRa 1.0 = LoRa + Sigfox + BLE + 802.15.4 + Zigbee + Thread + GPS + USB + Sensors + Battery
4 Configuration options :
-
Rechargeable Battery or Non Rechargeable battery
-
u.FL Antenna connector or SMA Antenna connector
(*) Specific Sensors can be reduced
Certified Murata LoRa/SIGFOX CMWX1ZZABZ-091.
Small size with internal antenna GPS ORG1410.
The STM32WB55 multiprotocol wireless and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification v5.0 and with IEEE 802.15.4-2011, and many serial interfaces: SPI, I2C, UART, ADC, CAN, USB and GPIO.
Sensors including 3-axis Accelerometer, 3-axis Magnetometer, 3-axis Gyroscope, Pressure, two Microphones, relative Humidity, ambient Light, Temperature sensors, Proximity/Gesture and Air Quality Sensor.
Small size 30x69mm, ready-to-use of the shelf ,Integrating Micro-SD Data-Logger equipped with Non-Rechargeable/Rechargeable battery.
LoRa + Sigfox + BLE + 802.15.4 + Zigbee + Thread + GPS + USB + Sensors + Battery
SMA or uFL connector
Rechargeable/Non-Rechargeable Battery
TECHNICAL RESOURCES & DOWNLOADS
Components Datasheets
Software Resources
SensiLoRa1.bin
I-CUBE-LRWAN Demo upload by Debugger SED-PRO only
SensiLoRa1_OTA.bin
I-CUBE-LRWAN Demo upload by App only
SensiLoRa1∞duino
SensiLoRa Arduino Project using STM32DUINO
I-CUBE-LRWAN Demo upload by Debugger SED-PRO only
SensiGFOX1_OTA.bin
I-CUBE-LRWAN Demo upload by App only
SensiGFOX1∞duino
SensiGFOX Arduino Project using STM32DUINO
3D STEP model
3D STEP
model
Mechanical Drawing
Mechanical
Drawing
Schematic
Software Developers
schematics
Pinout
Pinout for extensions and Arduino connector pins
